The pin-1 side of each ribbon cable is always marked with a colored stripe on the cable. Refer to the following illustration and instructions for installing the mainboard in a case: When setting the jumpers, ensure that the jumper caps are placed on the correct pins. To print the manual completely, please, download it. The disk drive software monitors the internal performance of the motors, media, heads, and electronics of the drive.
|Date Added:||11 April 2006|
|File Size:||61.6 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Use the cursor arrow keys to move the highlight to other options. Page 28 with cutouts so that they can only be installed correctly. Page 44 When you start the Mss7057ct Utility, the main menu appears.
This Setup Utility should be used: Install the hard disk drive into the drive cage in your ATX system case. The following table describes installing specific components: Jumpers with more than one pin are numbered. Page 20 Jumper 8 — 12 pin settings Pin Settings Volt.
You cannot make any changes to these fields.
Installing a Hard Disk Drive 1. A highlight indicates which option is cur- rently selected. When your system is in a power-saving mode, any modem signal auto- matically resumes the system. Chapter 1 Describes features of the main- board, and provides a shipping Introducing the Mainboard checklist.
External Connector Color Coding Many connectors now use standard colors as shown in the table below. Table of Contents Add to my manuals Add. Discharge static electricity by touching the metal case of a safely grounded object before working on the mainboard.
Page 13 There are many types of computer cases on the market.
Setting Jumpers This section explains how to set jumpers for correct configu- ration of the mainboard. We recommend that you leave this item at the ms70557ct value.
Short pins 2 and 3 on jumper 1. When you start the Setup Utility, the main menu appears. Installing the Processor Caution: This program is available for: Page 70 from a DOS diskette temporarily in order to run the flash memory utility.
Install new BIOS as follows: This equipment gen- erates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
The manufacturer makes no representations or warranties with re. Page 74 Jumper 8 ms7057cr 12 pin settings Pin Settings Volt. Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights re- served.
The information in this document is subject to change without notice.
When set to Disabled, pushing the hardware reset button will not reset the system. Jumper 8 — 12 pin settings Pin Settings Volt. This section explains how to set jumpers for correct configu- ration of the mainboard. Pull the CPU socket locking lever away from the sock- et to unhook it and raise the locking lever to the upright position.
After the POST routines are completed, the following message appears: