So this later one is better suited to my current setup. I tested the current version of the driverloader, and I got a copy of the Windows XP drivers for my card from Cisco. At startup, the performance file always tells that the processor is in P0 mode. I made some tests with my gigabit AT network switch, and the performance results are blazzingly fast. This is a documented problem. I was probably on crack when I wrote the above entries, because without this patched version of synaptics.
|Date Added:||24 February 2010|
|File Size:||5.37 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
According to these tests, I can conclude that the memory combination is now suitable for a daily use of this laptop.
See our Sustainability Report. I discovered recently that both ide-cd and ide-scsi where loaded concurrently, which is unnecessary.
It should then open a new window with a list of programs. You can download the related documentation here: Home Site map Search for: I stopped here, because I wanted to preserve my existing Linux installation. So the noticeable difference between both internal and supplementary modules is their Cas Wirelesz CL.
R40, IBM didn’t explain why this firmware upgrade is mandatory I wigeless probably do it if I acquire another hard driver in the future. For example, you can come back to the P0 state, and obtain back the full processor power, just by writing the desired value: This command allows to change the Reported Max of the drive, by opposition with the Native Max. Hard drive firmware update Bootable diskettes – ThinkPad General The new cpufreq stuff now works with Pentium-M processors, and provides an interface to the enhanced speed step capabilities of this processor, without the need to use ACPI.
The airflow extractor is located on the left of the machine, and I can feel the hot air blowed outside when using AC power, but it slowly becomes colder and more silent once the laptop is switced back to battery. See ciso MRTG graph I retried with arjanv’s 2. Scroll Lock indicator utility for Windows – ThinkPad Requires Internet access; not included.
So I made some profiling on the driver code to find what functions are called, and when, to try to isolate bottlenecks in the code that could cause unexpected bahaviour. All works fine, except one disturbing detail: If the value is set wierless “Disabled”, the number of cylinders reported by fdisks reflects the real limit of the disk capacity, if another value is set “Normal” or “Secure”the number of cylinders is lowered to hide this protected area. This is a regular package shipped in Fedora.
Local APIC support on uniprocessors has to be disabled in the kernel configuration. Note that this patch also works on a 2.
Notice that corresponding frequencies and power are not reliable: This confirmed my impression that a single memory module is buggy: Thinness may vary at certain points on the system. The latest cisco driver provides some code, that operates a different conversion on the raw value, depending on the model of the card model or not.
I currently only successfully tested association with and without WEP. This patch is useful to me, as it allows me to test the internal wireless card, with a single access point, whose wired interface is connected to the wired interface of my laptop. The support for the MPI card has been integrated in the kernel 2.
I wirepess the current version of the driverloader, and I got a copy of the Windows XP drivers for my card from Cisco. Scheduler patch to fix the tvtsched. The using Windows Zero Config should work fine.