However, overclocking stability was very good with the CUV4X. However, not all of the functions are included due to not very high reliability. There is nothing to prevent an installation of processors and coolers. I tried that with a core voltage of 1. The list below shows the results. Unfortunately, there are not many tests for dualprocessor systems.
|Date Added:||12 December 2012|
|File Size:||15.18 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
All-in-all, the CUV4X is a very nice board. IDE connectors are located in the center of the board. You can’t rise the Vcore and Vio. There are 4 connectors for fans but only three are controlled. Since the internal audio connectors are located right under the video card it may cause troubles for a variant with AC97 sound.
The asks may be switched off with a jumper on the board.
The system benchmarks did not increase when going from Motherboar to MHz on the bus frequency, probably because the memory speed had to be reduced. For ASUS it’s undoubtedly weak result.
When you are trying to find the correct settings for overclocking, the added boot time is very unwelcome. The Y axis is exaggerated again.
I just wanted to do a quick check and see what kind of system rating I would get with Norton Utilities The board features its own speaker, that’s why it’s not necessary to use case’s speaker. The only normal looking trace up there is the one labeled ‘reboot’, which I got after a motherboarx reboot of the system.
It’s a serious claim for the market of high-efficient PCs, work stations and entry-level servers. Finally, I put a new Celeron flip-chip in the system, motherbord tested for variation in the Norton benchmark.
The next available speed was 85MHz. ATX Form Factor, 26 cm x In the Windows driver properties it was specified that the disc would use DMA mode if it was available.
The slow boot times and inconsistent performance results suggest to me that they need to work on the board design some more. The driver from VIA was installed.
But it doesn’t hinder installation in any standard case. Below is a graph of the kind of result that made me curious in the first place. Of course, adus is an operating system that chooses a processor for applications and not a user.
Although it is the ATX recommendation, not all cases have the corresponding bracket.
When I returned the next morning, the demo had dropped out to the wsus, but the system had not hung. With the following raise of the frequency the system hung in the Quake3 20 minutes later. There is a xuv4x of LEDs near the connector. First, it’s necessary to use an operating system with support for mtherboard technology, for example Windows NT and Windows There are 16 FSB speeds which can be chosen with the jumpers on the board. With a little more work, Asus could make it a great board. Unfortunately, at the time of this review, we only had 1 Celeron-2 chip available for testing, so I’m not sure if these results are typical.
Besides, this utility allows to set different UltraATA modes for the devices.